General Instrument Functions
R&S
®
SMW200A
765User Manual 1175.6632.02 ─ 30
●
"Activating SMB version 1.0/2.0 client and server" on page 766
●
"Disabling the frequency and level indication in the status bar" on page 766
●
"Deactivating the user interface" on page 766
If security is a concern, see the document instrument security procedures for compre-
hensive description.
Changing the default user password of the instrument
► Note: We recommend that you change the default password before connecting the
instrument to a network.
How to:
● "Changing the default user password of the instrument" on page 765.
● "Changing the default security password" on page 765.
a) Select "System Config > Setup > Security > Security > Password Management
> User Password".
b) Enter the current password in the "Old Password" field.
c) Enter the new password in the "New Password" and "Confirm Password" fields.
d) Select "Change Password".
The user password is changed; the user name is displayed ("Security > Password
Management > User Password > User Name").
Changing the default security password
► Note: We recommend that you change the default password before connecting the
instrument to a network.
How to:
● "Changing the default user password of the instrument" on page 765.
● "Changing the default security password" on page 765.
a) Select "System Config > Setup > Security > Security > Password Management
> Security Password".
b) Enter the current password in the "Old Password" field.
The default password is 123456.
c) Enter the new password in the "New Password" and "Confirm Password" fields.
d) Select "Change Password".
Disabling the LAN interface
1. Select "System Config > Setup > Security > Security > LAN Services > Main Ser-
vices".
2. Select "LAN > Off".
All LAN connections and hence all LAN services are disabled.
Disabling LAN services
1. Select "System Config > Setup > Security > Security > LAN Services > Main Ser-
vices".
Using the Security Settings
To Next Page
Loading...