Rohde & Schwarz R&S SMW200A - GPIB Address Settings

Network Operation and Remote Control
R&S
®
SMW200A
789User Manual 1175.6632.02 ─ 30
The "Visa Resource String" dialog displays the VISA resource strings provided for
remote control via the different interfaces.
Remote command:
:SYSTem:COMMunicate:HISLip:RESource? on page 1228
:SYSTem:COMMunicate:NETWork:RESource? on page 1229
:SYSTem:COMMunicate:SOCKet:RESource? on page 1232
:SYSTem:COMMunicate:GPIB:RESource? on page 1227
:SYSTem:COMMunicate:USB:RESource? on page 1232
:SYSTem:COMMunicate:SERial:RESource? on page 1231
13.4.3 GPIB Address Settings
Access:
1. Select "System Config > Remote Access > GPIB Address".
2. Set the GPIB channel address of the connected instrument.
Remote command:
:SYSTem:COMMunicate:GPIB[:SELF]:ADDRess on page 1227
Remote Access Settings