Rohde & Schwarz R&S SMW200A - Remote Connections Settings

Network Operation and Remote Control
R&S
®
SMW200A
792User Manual 1175.6632.02 ─ 30
OPT String
Indicates the option string of the instrument as queried with common command *OPT?.
In Mode > "User Defined", you can define your own option string. A query responds
with this option string instead of the automatically created option string.
Remote command:
*OPT? on page 846
:SYSTem:ORESponse on page 1234
13.4.6 Remote Connections Settings
The "Remote Connections" dialog covers the active SCPI and TCP/IP connections,
and a history list of the connections that have accessed the instrument before.
13.4.6.1 Active Connections
Access:
► Select "System Config > Remote Access > Remote Connections > Active".
The "Active " tab shows the currently active remote connections, and you can
enable the display of the active connections in the task bar.
Show Remote Connections in Taskbar
Displays the currently active connections in the taskbar.
SCPI Connections
Displays the VISA resources strings of the remote connections currently controlling the
instrument via the LAN interface.
Remote command:
n.a.
Remote Access Settings