Network Operation and Remote Control
R&S
®
SMW200A
797User Manual 1175.6632.02 ─ 30
Parameter
Hostname
Instrument-specific hostname
Description Vector signal generator
Negotiation Auto detect
VXI-11 discovery Enabled
13.5.2 LXI Browser Settings
To access the instrument via the web browser:
► In the address field of the browser on your PC, type the instrument's host name or
IP address, for example http://10.113.1.151.
Note: Do not add the missing zeros in the IP address, while opening the instru-
ment homepage.
The instrument homepage (welcome page) opens.
The navigation pane of the browser interface contains the following elements:
● "LXI"
– "Home" opens the instrument homepage.
The homepage displays the device information required by the LXI stan-
dard, including the VISA resource string in read-only format.
– "Device Indicator" activates or deactivates the LXI status indication.
When activated, the LXI LEDs flash, both in the browser dialog and in the
LXI dialog of the connected instrument, see LAN Status. A green LXI status
symbol indicates that a LAN connection has been established; a red sym-
bol indicates that no LAN cable is connected.
– "Lan Configuration" allows you to configure LAN parameters and to initiate
a ping, see "Ping Client" on page 800.
LXI Settings
To Next Page
Loading...