Network Operation and Remote Control
R&S
®
SMW200A
808User Manual 1175.6632.02 ─ 30
See Chapter 13.6.1, "How To Enable Access via LAN", on page 803.
2. Connect the remote PC and the instrument in the same network.
See Chapter 13.6.3, "How To Connect to LAN", on page 804.
3. On the remote PC, start a web browser that supports HTML5 (W3C compliant).
4. Enter the IP address of the R&S SMW in the browser's address bar.
The R&S SMW's welcome page is displayed.
5. In the navigation pane, select "Instrument Control" > "Web Control".
Remote access to the instrument requires the password. The default password is
instrument.
6. Enter the password and confirm with the [Enter] key.
After the connection is established, the current screen of the R&S SMW is dis-
played in the browser window.
7. Use the mouse cursor and keyboard to access the functionality of the instrument
as you would directly perform on the instruments touchscreen and front panel.
Controlling the R&S
SMW Remotely
To Next Page
Loading...