Rohde & Schwarz R&S SMW200A - SCPI Recording Export Settings

Network Operation and Remote Control
R&S
®
SMW200A
823User Manual 1175.6632.02 ─ 30
See Chapter 13.8.3, "SCPI Recording Export Settings", on page 823.
The "SCPI Recording List" shows the last recorded and exported commands.
SCPI Recording List
Lists the automatically or manually recorded recorded SCPI commands.
Export
Opens the SCPI Recording Export dialog for configuring the file parameters for export.
Remove All, Remove First, Remove Last
Deletes either the first, the last or all recorded SCPI commands.
To remove several recorded commands, repeat the removing.
For post processing, export the SCPI command list in a file, see Chapter 13.8.5, "How
to Convert and Save SCPI Lists", on page 828.
13.8.3 SCPI Recording Export Settings
Scripts are configured and saved in the "SCPI Recording Export" dialog. This dialog
opens automatically, when you stop recording.
Access:
1. Select "Show SCPI Recording List" in the context-sensitive menu.
The "SCPI Recording List" dialog opens.
2. Select "Export".
Automating Tasks with Remote Command Scripts