Rohde & Schwarz R&S SMW200A - How to Enable the VNC Service; Operating the R&S SMW Remotely Via VNC

Network Operation and Remote Control
R&S
®
SMW200A
831User Manual 1175.6632.02 ─ 30
1 = Path for tracing (breadcrumbs navigation)
2 = Description of the function in manual control
3 = Cross-reference to return back to the SCPI command
13.9 Operating the R&S SMW Remotely via VNC
This section shows you some examples of the various possibilities to set up remote
operation.
●
Using a desktop system
– Chapter 13.9.2.1, "Using a Web Browser", on page 832
– Chapter 13.9.2.2, "Using a VNC Client Software", on page 832
●
Using a smart device
– Chapter 13.9.3.1, "Using a VNC App", on page 835
– Chapter 13.9.3.2, "Using a Web Browser with HTML5", on page 836
– Chapter 13.9.3.3, "Special Mode QR Code", on page 836
13.9.1 How To Enable the VNC Service
1.
NOTICE! Enabled VNC service can lead to unauthorized access.
Operating the R&S
SMW Remotely via VNC