Getting Started
R&S
®
SMW200A
88User Manual 1175.6632.02 ─ 30
3.4.2.3 Generation of Signals for Testing of WCDMA Handover (Two Cells)
The block diagram in this example depicts the generation of a test signal using both
internal baseband generators and both RF outputs, for example for handover tests.
The R&S SMW acts as two independent generators in one instrument.
3.4.2.4
Generation of an EUTRA/LTE 8x2 MIMO Signal for UE Tests
The block diagram in this example depicts the generation of an EUTRA/LTE test signal
in a 8x2 MIMO scenario, for example for UE tests. The instrument uses a coupled
internal baseband source to generate all required baseband signals.
System Overview
To Next Page
Loading...