Remote Control Commands
R&S
®
SMW200A
881User Manual 1175.6632.02 ─ 30
:HCOPy:DATA?
Transfers the hard copy data directly as a NByte stream to the remote client.
Return values:
<Data> block data
Example: See Example "Store a hard copy of the display" on page 879
Usage: Query only
:HCOPy:IMAGe:FORMat
<Format>
:HCOPy:DEVice:LANGuage <Language>
Selects the graphic format for the hard copy. You can use both commands alterna-
tively.
Parameters:
<Language> BMP | JPG | XPM | PNG
*RST: PNG
Example: See Example "Store a hard copy of the display" on page 879
Manual operation: See "Format" on page 704
:HCOPy:REGion <Region>
Selects the area to be copied.
You can create a snapshot of the screen or an active dialog.
Parameters:
<Region> ALL | DIALog
*RST: ALL
Example: See Example "Store a hard copy of the display" on page 879
Manual operation: See "Region" on page 705
:HCOPy:FILE[:NAME] <Name>
Determines the file name and path to save the hard copy, provided automatic naming
is disabled.
Note: If you have enabled automatic naming, the instrument automatically generates
the file name and directory, see Chapter 14.14.2, "Automatic Naming", on page 882.
Parameters:
<Name> string
Example: See Example "Store a hard copy of the display" on page 879
Manual operation: See "File..." on page 704
HCOPy Subsystem
To Next Page
Loading...