Rohde & Schwarz R&S SMW200A - Page 931

Remote Control Commands
R&S
®
SMW200A
931User Manual 1175.6632.02 ─ 30
Manual operation: See "External Instrument" on page 145
See "Set Symbolic Name" on page 146
See "Remote Channel" on page 146
See "Hostname or IP Address" on page 146
See "Device ID" on page 146
See "RF Path" on page 147
:SCONfiguration:EXTernal:REMote:REName
Changes the symbolic name of the instrument.
Example: See Example "Connecting and configuring external instrument"
on page 905.
Usage: Setting only
:SCONfiguration:EXTernal:CODer<ch>:REMote:DETect?
:SCONfiguration:EXTernal:FADer<ch>:REMote:DETect?
:SCONfiguration:EXTernal:BBMM<ch>:REMote:DETect?
Searches for external instruments connected to the particular digital interfaces.
Return values:
<DetectedInstr> string
If the detection fails, the query returns "None".
Example: See Example "Connecting and configuring external instrument"
on page 905.
Usage: Query only
Manual operation: See "Detect/Scan" on page 145
:SCONfiguration:EXTernal:CODer<ch>:REMote:ISELect <InstrName>[, <RfPath>]
:SCONfiguration:EXTernal:FADer<ch>:REMote:ISELect <InstrName>[, <RfPath>]
:SCONfiguration:EXTernal:BBMM<ch>:REMote:ISELect <InstrName>[, <RfPath>]
:SCONfiguration:EXTernal:RF<ch>:REMote:ISELect <InstrName>[, <RfPath>]
:SCONfiguration:EXTernal:IQOutput<ch>:REMote:ISELect <InstrName>[,
<RfPath>]
Select an external instrument for the selected connector.
Parameters:
<InstrName> String
Instrument alias name, as retrieved with the command :
SCONfiguration:EXTernal:REMote:LIST? or defined with
the command :SCONfiguration:EXTernal:REMote:ADD.
<RfPath> String
Determines the used RF output of the external instrument.
SCONfiguration Subsystem