Rohde & Schwarz R&S SMW200A - Page 943

Remote Control Commands
R&S
®
SMW200A
943User Manual 1175.6632.02 ─ 30
:SCONfiguration:RFALignment:SETup:INFO:WIRing:LO:CONStellation?
Queries the connection method used to distribute the LO frequency signal.
Return values:
<Constellation> DCHain | STAR
DCHain
Daisy chain
STAR
Star
Example: See Example "Retrieving details on the calibrated values"
on page 935.
Usage: Query only
Manual operation: See "LO Configuration > Wiring Constellation" on page 662
:SCONfiguration:RFALignment:SETup:INFO:WIRing:LO:SOURce?
Queries if the current instrument uses its own or an external LO signal.
Return values:
<Source> PRIMary | EXTernal
PRIMary
The instrument uses its LO signal and provides it to the other
instruments.
EXTernal
The instrument uses an external LO signal, for example from
other R&S SMW (the one with
SCONfiguration:RFALignment:SETup:INFO:WIRing:
LO:SOURce PRIMary).
Example: See Example "Retrieving details on the calibrated values"
on page 935.
Usage: Query only
Manual operation: See "LO Configuration > Signal Source" on page 661
:SCONfiguration:RFALignment:SETup:INFO:WIRing:REF:SOURce?
Queries if the current instrument uses its own or an external reference signal.
Return values:
<Source> PRIMary | EXTernal
PRIMary
The instrument uses its reference signal and provides it to the
other instruments.
SCONfiguration Subsystem