Rohde & Schwarz R&S SMW200A - Page 997

Remote Control Commands
R&S
®
SMW200A
997User Manual 1175.6632.02 ─ 30
Manual operation: See "Save/Recall" on page 264
[:SOURce<hw>]:BB:DM:STANdard:ULISt:DELete <Filename>
[:SOURce<hw>]:BB:DM:SETTing:DELete <Filename>
Deletes the selected file from the default or specified directory. Deleted are files with
the file extension *.dm respectively *.dm_stu.
Refer to Chapter 14.7.2, "Accessing Files in the Default or in a Specified Directory",
on page 852 for general information on file handling in the default and a specific direc-
tory.
Setting parameters:
<Filename> string
Example: See Example "Performing general tasks" on page 989
Usage: Setting only
Manual operation: See "Save/Recall" on page 264
Filter Settings
[:SOURce<hw>]:BB:DM:FILTer:TYPE <Type>
The command selects the filter type.
When a standard is selected (:BB:DM:STAN), the filter type and filter parameter are
set to the default value.
Parameters:
<Type> RCOSine | COSine | GAUSs | LGAuss | CONE | COF705 |
COEQualizer | COFequalizer | C2K3x | APCO25 | SPHase |
RECTangle | USER | PGAuss | LPASs | DIRac | ENPShape |
EWPShape | LTEFilter | LPASSEVM | APCO25Hcpm |
APCO25Lsm
*RST: GAUSs
Example: See [:SOURce<hw>]:BB:DM:FILTer:PARameter:SPHase
on page 998
Manual operation: See "Filter" on page 275
[:SOURce<hw>]:BB:DM:FILTer:PARameter:APCO25 <Apco25>
[:SOURce<hw>]:BB:DM:FILTer:PARameter:APCO25Lsm:GAUSs <Gauss>
[:SOURce<hw>]:BB:DM:FILTer:PARameter:APCO25Lsm:LOWPass <FiltParm>
[:SOURce<hw>]:BB:DM:FILTer:PARameter:COSine:BANDwidth <Bandwidth>
[:SOURce<hw>]:BB:DM:FILTer:PARameter:COSine[:ROLLoff] <Cosine>
[:SOURce<hw>]:BB:DM:FILTer:PARameter:GAUSs <Gauss>
[:SOURce<hw>]:BB:DM:FILTer:PARameter:LPASs <LPass>
[:SOURce<hw>]:BB:DM:FILTer:PARameter:LPASSEVM <LPassEvm>
[:SOURce<hw>]:BB:DM:FILTer:PARameter:PGAuss <PGauss>
SOURce Subsystem