Safety and regulatory informationR&S VENICE S
7
User Manual | 2906.2506.02 - 01
Safety and regulatory information
The product documentation helps you use the product safely and efficiently.
Follow the instructions provided here and in the following chapters.
Intended use
The R&S system may only be used according to its intended function as
described in "Product Description" and within the specified environmental
conditions as described in the data sheet. Any other use or extension of this
function is considered inappropriate. Inappropriate use may lead to situa-
tions resulting in personal injury or property damage.
Observe the operating conditions and performance limits stated in the data
sheet.
Target audience
Each person who is responsible for installation, operation, maintenance or
setting of the system must read and understand this manual.
To use this manual you should know how to handle computer equipment.
Furthermore, to connect the R&S system to a network you should have
experience as a network administrator and know how to set up the required
network connections on the installation site both in hard- and software.
When performing maintenance tasks on the hardware of the R&S system,
you must be qualified to work on, repair and test electrical equipment.
Where do I find safety information?
Safety information is part of the product documentation. It warns you of
potential dangers and gives instructions on how to prevent personal injury or
damage caused by dangerous situations. Safety information is provided as
follows:
● In chapter Safety instructions (page 8). The same information is
provided in many languages as printed "Safety Instructions". The printed
"Safety Instructions" are delivered with the product.
● Throughout the documentation, safety instructions are provided when
you need to take care during setup or operation.
To Next Page
Loading...