Rohde & Schwarz R&S ZNA Series - 5.2.4.4 More Harmonics dialog

GUI reference
R&S
®
ZNA
366User Manual 1178.6462.02 ─ 29
Remote command:
CALCulate<Ch>:PARameter:MEASure '<TraceName>', 'h2b2(p1)'
CALCulate<Ch>:PARameter:SDEFine '<TraceName>', 'h2b2(p1)'
...
b2 3rd Harmonic Src Port 1
Power of the outgoing wave at port 2, measured at 2 times the frequency of the wave
generated at port 1
Remote command:
CALCulate<Ch>:PARameter:MEASure '<TraceName>', 'h3b2(p1)'
CALCulate<Ch>:PARameter:SDEFine '<TraceName>', 'h3b2(p1)'
...
5.2.4.4 More Harmonics dialog
The controls in the "More Harmonics" dialog allow you to select and configure arbitrary
harmonics measurements in the current channel.
Access: Trace – [Meas] > "S-Params" > "Harmonics" > "More Harmonics..."
Meas softtool