GUI reference
R&S
®
ZNA
793User Manual 1178.6462.02 ─ 29
●
one channel for intermodulation measurements
Summary
The "Summary" page of the "DUT Centric Wizard"
●
summarizes which channels will be created and which parameters they will mea-
sure
●
allows you where to define these channels (new setup, append to current setup,
replace current setup)
●
allows you to decide whether to proceed with a (suitable) calibration
Calibrate Newly Created Channels
If you finish the "DUT Centric Wizard" with "Calibrate Newly Created Channels"
selected, then, after creating the required (setup and) channels, the FW will proceed
with suitable calibrations.
DUT softtool
To Next Page
Loading...
