Rohde & Schwarz R&S ZNB - Page 56

Getting Started
R&S
®
ZNB/ZNBT
56User Manual 1173.9163.02 ─ 53
4.3.2.6 Hardkey Panel
The (virtual) "Hard Key" panel provides on-screen access to the function keys (plus the
[UNDO] and [REDO] key) that are available at the front panel of a R&S ZNB. Most of
the function keys open a related softtool. For a short description, refer to section Chap-
ter 4.2.1.2, "Function Keys", on page 35.
The "Hard Key" panel is particularly useful if the analyzer is controlled from an external
monitor or Remote Desktop.
For the R&S ZNB, it is hidden by default, for the R&S ZNBT it is visible by default.
You can display the "Hard Key" panel using one of the following methods:
●
Select SYSTEM – [DISPLAY] > "View Bar" > "Hard Key Panel".
●
Select "Display"> "View Bar" > "Hard Key Panel On" from the menu bar.
●
Select "Hard Key" from the context menu of the softtool panel.
4.3.2.7 Status Bar
The status bar shows
●
the active channel
●
the current channel's sweep averaging counter (e.g. "Ch<i>: Avg 9/10"), or "Ch<i>:
Avg None" if averaging is disabled
●
the progress of the sweep
The progress bar also shows when the R&S ZNB/ZNBT prepares a sweep with
new channel settings
(See Chapter 5.1.4, "Sweep Control", on page 83)
Operating the Instrument