Rohde & Schwarz R&S ZNB - Page 796

Command Reference
R&S
®
ZNB/ZNBT
796User Manual 1173.9163.02 ─ 53
CALCulate:FMODel:ISD<Ph_pt>:COUPon:MEASure
For a fixture modeling with the ISD tool and coupon types SYMMetric2x | OPEN1x |
SHORt1x (see CALCulate:FMODel:ISD<Ph_pt>:COUPon:TYPE), this command
starts the measurement of the coupon at the active ports (see CALCulate:FMODel:
ISD<Ph_pt>:COUPon[:STATe]).
Suffix:
<Ph_pt>
.
This suffix is ignored.
Example: See Chapter 9.2.8, "Fixture Modeling", on page 1371
Usage: Event
Manual operation: See "Measure / Measure Open / Measure Short" on page 585
CALCulate:FMODel:ISD<Ph_pt>:COUPon:MEASure:FILename <String>
For a fixture modeling with the ISD tool and coupon types SYMMetric2x | OPEN1x |
SHORt1x (see CALCulate:FMODel:ISD<Ph_pt>:COUPon:TYPE), this command
loads the coupon properties from a Touchstone file.
Suffix:
<Ph_pt>
.
This suffix is ignored.
Parameters:
<String> Path to the Touchstone file, either absolute or relative to the cur-
rent directory (see MMEMory:CDIRectory)
Manual operation: See "Load File / 1x Open Preset / 1x Short Preset " on page 585
CALCulate:FMODel:ISD<Ph_pt>:COUPon:MEASure:OPEN
For a fixture modeling with the ISD tool and coupon type OPSHort1x (see
CALCulate:FMODel:ISD<Ph_pt>:COUPon:TYPE), this command starts the mea-
surement of the Open coupon at the active ports (see CALCulate:FMODel:
ISD<Ph_pt>:COUPon[:STATe]).
Suffix:
<Ph_pt>
.
This suffix is ignored.
Usage: Event
Manual operation: See "Measure / Measure Open / Measure Short" on page 585
CALCulate:FMODel:ISD<Ph_pt>:COUPon:MEASure:OPEN:FILename <String>
For a fixture modeling with the ISD tool and coupon type OPSHort1x (see
CALCulate:FMODel:ISD<Ph_pt>:COUPon:TYPE), this command loads the proper-
ties of the Open coupon from a Touchstone file.
Suffix:
<Ph_pt>
.
This suffix is ignored.
SCPI Command Reference