R&S
®
ZVA/ZVB/ZVT Channel Menu
1145.1084.12 4.197 E-6
• Start Cal opens a submenu to select a new calibration and start the calibration wizard.
• Repeat Previous Cal reopens the wizard to repeat and optimize the previous calibration.
• Correction Off activates or deactivates the system error correction in the active channel.
• Power Cal opens a submenu controlling the source and receiver power calibration.
• Power Correction On (re-)applies the current power calibration in the active channel.
• Power Correction Off disables the power calibration in the active channel.
• Cal Manager opens a dialog to store system error correction data to a Cal Pool and to assign
correction data to channels.
• Recall Last Cal Set loads and activates the setup for which the last calibration was performed.
• Cal Kits opens a dialog to manage the calibration kits in use, add new kits and import or export
kits.
To Next Page
Loading...
