Display Config R&S
®
ZVA/ZVB/ZVT
1145.1084.12 4.246 E-6
Display Config
The Display Config submenu configures the screen by showing or hiding controls and information
elements and controls the appearance of the individual diagrams.
The Display Config menu contains the following functions:
• Softkey Bar shows or hides the softkey bar at the right edge of the screen.
• Hardkey Bar shows or hides the hardkey bar at the left edge of the screen.
• Title Bar shows or hides the title bar of the NWA application.
• Status Bar shows or hides the status bar across the bottom of the screen.
• Color Scheme controls the colors in all diagram areas.
• Frequency Info shows or hides the frequency values in the diagram areas.
Hiding the controls and information elements leaves more space for the diagram areas. All elements
may be shown or hidden simultaneously. A checkmark next to the menu item indicates that the view
element is displayed.
Softkey Bar
Shows or hides the softkey bar at the right edge of the screen.
The softkey bar shows up to 8 commands of the active menu indicated above softkey no. 1. The figure
above shows the upper part of the softkey bar corresponding to the Trace – Measure submenu.
Pressing the key to the right of a softkey directly activates a submenu, calls up the numeric entry bar or
a dialog or initiates an action. See Softkey Bar in the introductory chapter for more information.
To Next Page
Loading...
