Rohde & Schwarz RTA4000 - Page 661

Remote control commands
R&S
®
RTA4000
661User Manual 1335.7898.02 ─ 08
Return values:
<ChecksumValue> Decimal value
Usage: Query only
BUS<b>:LIN:FRAMe<n>:IDPValue?
Returns the parity value.
Suffix:
<b>
.
1..4
<n> *
Selects the frame (1...n).
Return values:
<IdentifierParityValue>Decimal value
Usage: Query only
BUS<b>:LIN:FRAMe<n>:IDSTate?
Returns the identifier state of the selected frame.
Suffix:
<b>
.
1..4
<n> *
Selects the frame (1...n).
Return values:
<IdentifierState> OK | PRERror | UVAL | INSufficient
PRERror: parity error
UVAL: unexpected value
INSufficient: the frame is not completely contained in the acqui-
sition. The decoded part of the frame is valid.
Usage: Query only
BUS<b>:LIN:FRAMe<n>:IDValue?
Returns the identifier value (address)
Suffix:
<b>
.
1..4
<n> *
Selects the frame (1...n).
Return values:
<IdentifierValue> Decimal value
Usage: Query only
Serial bus analysis