Rohde & Schwarz RTB2000 Series - Page 278

Fernsteuerbefehle
R&S
®
RTB2000
278Bedienhandbuch 1333.1611.03 ─ 05
CHANnel<m>:OVERload................................................................................................ 281
CHANnel<m>:THReshold............................................................................................... 282
CHANnel<m>:THReshold:FINDlevel................................................................................282
CHANnel<m>:THReshold:HYSTeresis............................................................................. 282
CHANnel<m>:LABel.......................................................................................................283
CHANnel<m>:LABel:STATe.............................................................................................283
CHANnel<m>:STATe <State>
Switches the channel signal on or off.
Suffix:
<m>
.
1..4
Selects the input channel. The number of channels depends on
the instrument.
Parameter:
<State> ON | OFF
CHANnel<m>:AON
Switches all analog channels on.
Suffix:
<m>
.
The suffix is irrelevant.
Verwendung: Ereignis
CHANnel<m>:AOFF
Switches all analog channels off.
Suffix:
<m>
.
The suffix is irrelevant.
Verwendung: Ereignis
CHANnel<m>:SCALe <Scale>
Sets the vertical scale for the indicated channel.
Suffix:
<m>
.
1..4
Selects the input channel. The number of channels depends on
the instrument.
Parameter:
<Scale> Scale value, given in Volts per division.
Bereich: 1e-3 bis 10 (without probe attenuation)
*RST: 5e-3
Std.-einheit: V/div
Grundeinstellungen