Rohde & Schwarz RTB2000 Series - Page 306

Fernsteuerbefehle
R&S
®
RTB2000
306Bedienhandbuch 1333.1611.03 ─ 05
REFCurve<m>:STATe
Displays or hides the selected reference waveform.
Suffix:
<m>
.
1..4
Selects the reference waveform.
Parameter:
<State> ON | OFF
*RST: OFF
REFCurve<m>:UPDate
Updates the selected reference by the waveform defined with REFCurve<m>:SOURce.
Suffix:
<m>
.
1..4
Selects the reference waveform.
Verwendung: Ereignis
REFCurve<m>:SAVE <Filename>
Stores the reference waveform in the specified file.
Suffix:
<m>
.
1..4
Selects the reference waveform.
Einstellparameter:
<Filename> String with path and file name
Verwendung: Nur Einstellung
REFCurve<m>:LOAD <Filename>
Loads the waveform data from the indicated reference file to the reference waveform.
To load the correspondent instrument settings, use REFCurve<m>:LOAD:STATe
auf Seite 307.
Suffix:
<m>
.
1..4
Selects the reference waveform.
Einstellparameter:
<Filename> String with path and file name
Verwendung: Nur Einstellung
Messkurvenanalyse