Rohde & Schwarz RTB2000 Series - Suche

Fernsteuerbefehle
R&S
®
RTB2000
308Bedienhandbuch 1333.1611.03 ─ 05
Suffix:
<m>
.
1..4
Selects the reference waveform.
Parameter:
<Scale> Std.-einheit: V/div
REFCurve<m>:WCOLor <WaveformColor>
Selects a color for the reference waveform. The default color is white. You can select
another monochrome color, or a color scale.
Suffix:
<m>
.
1..4
Selects the reference waveform.
Parameter:
<WaveformColor> YELLow | GREen | ORANge | BLUE | LBLUE | WHITE | CYAN |
PINK | RED | TEMPerature | RAINbow | FIRE | DEFault
*RST: DEF
REFCurve<m>:LABel <WaveformLabel>
Defines a label for the indicated reference waveform.
Suffix:
<m>
.
1..4
Selects the reference waveform.
Parameter:
<WaveformLabel> String parameter
String parameter
Beispiel:
REFCurve2:LABel "Origin"
Sets the label "Origin" for reference R2.
15.6.4 Suche
● Allgemeine Sucheinstellungen..............................................................................309
● Konfiguration Flankensuche..................................................................................311
● Konfiguration Pulsbreitensuche............................................................................ 312
● Konfiguration Peaksuche...................................................................................... 313
● Konfiguration Anstiegszeit-/Abfallzeit-Suche........................................................ 314
● Konfiguration Runt-Suche.....................................................................................315
● Konfiguration Daten-zu-Takt-Suche...................................................................... 317
● Konfiguration Mustersuche................................................................................... 318
● Suchergebnisse.................................................................................................... 321
Messkurvenanalyse