Rohde & Schwarz RTB2000 Series - Anwendungen; Maskentests

Fernsteuerbefehle
R&S
®
RTB2000
352Bedienhandbuch 1333.1611.03 ─ 05
Suffix:
<m>
.
1, the suffix is irrelevant.
Rückgabewerte:
<Slope> Inverse value
Verwendung: Nur Abfrage
15.8 Anwendungen
15.8.1 Maskentests
15.8.1.1 Maskeneinstellungen
MASK:STATe.................................................................................................................352
MASK:SOURce............................................................................................................. 352
MASK:CHCopy..............................................................................................................353
MASK:YPOSition........................................................................................................... 353
MASK:YSCale............................................................................................................... 353
MASK:XWIDth...............................................................................................................353
MASK:YWIDth...............................................................................................................353
MASK:SAVE..................................................................................................................353
MASK:LOAD................................................................................................................. 354
MASK:STATe <State>
Turns the mask test application on or off. When turning off, any temporarily stored
masks are deleted.
Parameter:
<State> ON | OFF
*RST: OFF
MASK:SOURce <Source>
Defines the channel to be compared with the mask, and also the channel from which
the mask is created.
Parameter:
<Source> CH1 | CH2 | CH3 | CH4
CH3 and CH4 are only available on 4-channel models.
*RST: CH1
Anwendungen