Rohde & Schwarz RTB2000 Series - Page 356

Fernsteuerbefehle
R&S
®
RTB2000
356Bedienhandbuch 1333.1611.03 ─ 05
Parameter:
<Yout> ON | OFF
*RST: OFF
15.8.1.3 Maskentest
MASK:TEST..................................................................................................................356
MASK:RESet:COUNter...................................................................................................356
MASK:COUNt?..............................................................................................................356
MASK:VCOunt?.............................................................................................................356
MASK:CAPTure[:MODE].................................................................................................356
MASK:TEST <Test>
Starts, finishes or interrupts a mask test.
Parameter:
<Test> RUN | STOP | PAUSe
*RST: STOP
MASK:RESet:COUNter
Sets the counters of passed and failed acquisitions to Zero.
Verwendung:
Ereignis
MASK:COUNt?
Returns the number of tested acquisitions.
Rückgabewerte:
<TotalCount> Total number of tested acquisitions
Verwendung: Nur Abfrage
MASK:VCOunt?
Returns the number of acquistions that hit the mask.
Rückgabewerte:
<ViolationCount> Total number of violations
Verwendung: Nur Abfrage
MASK:CAPTure[:MODE] <CaptureMode>
Only available with history. The command selects whether all acquisitions are stored in
segments, or only failed acquisition. You can use the hostiry to analyze the segments.
Anwendungen