Rohde & Schwarz RTB2000 Series - Page 361

Fernsteuerbefehle
R&S
®
RTB2000
361Bedienhandbuch 1333.1611.03 ─ 05
SPECtrum:WAVeform:MINimum[:ENABle] <WaveformEnable>
SPECtrum:WAVeform:SPECtrum[:ENABle] <WaveformEnable>
Enables/diables the indicated waveform.
Parameter:
<WaveformEnable> ON | OFF
*RST: ON
SPECtrum:FREQuency:AVERage:COUNt <AverageCount>
Defines the number of spectrums used for averaging.
Parameter:
<AverageCount>
SPECtrum:FREQuency:AVERage:COMPlete?
Returns the state of spectrum averaging.
Parameter:
<AverageComplete>
Verwendung: Nur Abfrage
SPECtrum:FREQuency:RESet
Resets the Min Hold, Max Hold, Spectrum and Average waveforms to the current
waveform.
Verwendung:
Ereignis
15.8.2.4 Messkurvendaten
SPECtrum:WAVeform:AVERage:DATA?........................................................................... 362
SPECtrum:WAVeform:MAXimum:DATA?.......................................................................... 362
SPECtrum:WAVeform:MINimum:DATA?........................................................................... 362
SPECtrum:WAVeform:SPECtrum:DATA?..........................................................................362
SPECtrum:WAVeform:AVERage:DATA:HEADer?.............................................................. 362
SPECtrum:WAVeform:MAXimum:DATA:HEADer?............................................................. 362
SPECtrum:WAVeform:MINimum:DATA:HEADer?...............................................................362
SPECtrum:WAVeform:SPECtrum:DATA:HEADer?............................................................. 362
SPECtrum:WAVeform:AVERage:DATA:POINts?................................................................362
SPECtrum:WAVeform:MAXimum:DATA:POINts?...............................................................362
SPECtrum:WAVeform:MINimum:DATA:POINts?................................................................362
SPECtrum:WAVeform:SPECtrum:DATA:POINts?...............................................................362
SPECtrum:WAVeform:AVERage:DATA:XINCrement?........................................................ 363
SPECtrum:WAVeform:MAXimum:DATA:XINCrement?........................................................363
SPECtrum:WAVeform:MINimum:DATA:XINCrement?.........................................................363
SPECtrum:WAVeform:SPECtrum:DATA:XINCrement?....................................................... 363
SPECtrum:WAVeform:AVERage:DATA:XORigin?.............................................................. 363
Anwendungen