Rohde & Schwarz RTB2000 Series - Page 371

Fernsteuerbefehle
R&S
®
RTB2000
371Bedienhandbuch 1333.1611.03 ─ 05
SPECtrum:FREQuency:BANDwidth[:RESolution]:AUTO <AutoSpanRBWratio>
Enables the auto resolution bandwidth mode. In the auto mode „Span“: „RBW“ ratio of
~1:100 is set.
Parameter:
<AutoSpanRBWratio>ON | OFF
*RST: ON
SPECtrum:DIAGram:COLor:MAGNitude:MODE <MagnitudeMode>
Enables the magnitude coloring of the waveform.
Parameter:
<MagnitudeMode> ON | OFF
SPECtrum:DIAGram:COLor:MAXimum[:LEVel]
<MaximumLevel>
Sets the level used as a maximum of the color scale selected with SPECtrum:
DIAGram:COLor:SCHeme:SPECtrogramm/SPECtrum:DIAGram:COLor:SCHeme:
FDOMain.
All level values lower than the minimum are displayed with the minimum color.
Parameter:
<MaximumLevel>
SPECtrum:DIAGram:COLor:MINimum[:LEVel] <MinimumLevel>
Sets the level used as a minimum of the color scale selected with SPECtrum:
DIAGram:COLor:SCHeme:SPECtrogramm/SPECtrum:DIAGram:COLor:SCHeme:
FDOMain.
All level values lower than the minimum are displayed with the minimum color.
Parameter:
<MinimumLevel>
SPECtrum:DIAGram:COLor:SCHeme:FDOMain <ColorScheme>
Sets the color scale for the display of the waveform in the frequency domain diagram.
Parameter:
<ColorScheme> MONochrom | TEMPerature | RAINbow
SPECtrum:DIAGram:COLor:SCHeme:SPECtrogramm <ColorScheme>
Sets the color scale for the display of the spectrogram.
Parameter:
<ColorScheme> MONochrom | TEMPerature | RAINbow
Anwendungen