Rohde & Schwarz RTB2000 Series - XY-Messkurven

Fernsteuerbefehle
R&S
®
RTB2000
372Bedienhandbuch 1333.1611.03 ─ 05
SPECtrum:DIAGram:SPECtrogram[:ENABle] <Enable>
Enables the display of the spectrum diagram.
Parameter:
<Enable> ON | OFF
15.8.4 XY-Messkurven
DISPlay:MODE..............................................................................................................372
DISPlay:XY:XSOurce..................................................................................................... 372
DISPlay:XY:Y1Source.................................................................................................... 372
DISPlay:XY:Y2Source.................................................................................................... 373
DISPlay:MODE <Mode>
Sets the diagram mode.
Parameter:
<Mode> YT | XY
YT
Default time diagram with a time axis in x-direction and the sig-
nal amplitudes displayed in y-direction.
XY
XY-diagram, combines the voltage levels of two waveforms in
one diagram.
*RST: YT
DISPlay:XY:XSOurce <Source>
Defines the source to be displayed in x-direction in an XY-diagram, replacing the usual
time base.
Parameter:
<Source> CH1 | CH2 | CH3 | CH4
CH3 and CH4 are only available with 4-channel R&S RTB2000
oscilloscopes.
*RST: CH1
DISPlay:XY:Y1Source <Source>
Defines the first source to be displayed in y-direction in an XY-diagram.
Parameter:
<Source> CH1 | CH2 | CH3 | CH4
CH3 and CH4 are only available with 4-channel R&S RTB2000
oscilloscopes.
*RST: CH2
Anwendungen