Rohde & Schwarz RTB2000 Series - Page 400

Fernsteuerbefehle
R&S
®
RTB2000
400Bedienhandbuch 1333.1611.03 ─ 05
Parameter:
<Style> LINes | RETicle | NONE
LINes
Displays the grid as horizontal and vertical lines.
RETicle
Displays crosshairs instead of a grid.
NONE
No grid is displayed.
*RST: LIN
DISPlay:INTensity:BACKlight
<Intensity>
Defines the intensity of illuminated front panel keys and rotary knobs.
Parameter:
<Intensity> Value in percent
Bereich: 10 bis 100
Inkrement: 1
*RST: not available, *RST does not change the intensity
Std.-einheit: %
DISPlay:INTensity:GRID <Intensity>
Defines the brightness of the grid lines in the diagram.
Parameter:
<Intensity> Bereich: 0 bis 100
Inkrement: 1
*RST: not available, *RST does not change the intensity
Std.-einheit: %
DISPlay:INTensity:WAVeform <Intensity>
Defines the brightness of the waveform lines in the diagram.
Parameter:
<Intensity> Bereich: 0 bis 100
Inkrement: 1
*RST: not available, *RST does not change the intensity
Std.-einheit: %
DISPlay:PALette <Palette>
Sets the color and brightness of the displayed waveform samples depending on their
cumulative occurance.
Allgemeine Geräteeinstellungen