Rohde & Schwarz RTB2000 Series - Page 404

Fernsteuerbefehle
R&S
®
RTB2000
404Bedienhandbuch 1333.1611.03 ─ 05
Verwendung: Ereignis
SYSTem:SET <Setup>
Defines or queries the device settings that can be saved and load manually with [File]
> „Device Settings“.
Parameter:
<Setup> 488.2 block data
Verwendung: SCPI-konform
SYSTem:ERRor[:NEXT]?
Returns the oldest item of the error/event queue and removes it from the queue.
Rückgabewerte:
<Error> Error/event_number,"Error/event_description>[;Device-depen-
dent info]"
Beispiel:
0,"No error"
Verwendung: Nur Abfrage
SCPI-konform
SYSTem:ERRor:ALL?
Returns a list of all error/event numbers and their description, and removes it from the
error/event queue.
Rückgabewerte:
<ErrorList> List of ErrorFormat
List of: Error/event_number,"Error/event_description>[;Device-
dependent info]"
If the queue is empty, the response is 0,"No error"
Verwendung: Nur Abfrage
SCPI-konform
SYSTem:PRESet
Resets the instrument to the default state, has the same effect as *RST.
Verwendung:
Ereignis
SYSTem:EDUCation:PRESet
Deletes the password of the education mode.
Verwendung:
Ereignis
Allgemeine Geräteeinstellungen