Rohde & Schwarz RTB2000 Series - Page 410

Fernsteuerbefehle
R&S
®
RTB2000
410Bedienhandbuch 1333.1611.03 ─ 05
Suffix:
<b>
.
1..2
Selects the bus.
Parameter:
<Label> String value
BUS<b>:LABel:STATe <State>
Displays or hides the bus label. The bus label is shown on the the right side of the dis-
play.
Suffix:
<b>
.
1..2
Selects the bus.
Parameter:
<State> ON | OFF
*RST: ON
BUS<b>:DSIGnals <BitsSignals>
Displays the individual bit lines above the decoded bus line.
Suffix:
<b>
.
1 | 2
Parameter:
<BitsSignals> ON | OFF
*RST: ON
BUS<b>:DSIZe <DisplaySize>
Sets the height of the decoded bus signal on the screen.
Suffix:
<b>
.
1 | 2
Parameter:
<DisplaySize> SMALl | MEDium | LARGe | DIV2 | DIV4
DIV2 | DIV4
2 or 4 divisions
SMALl | MEDium | LARGe
Size of indicated bus is smaller than 2 div.
*RST: MEDium
BUS<b>:POSition <Position>
Sets the vertical position of the decoded bus signal in divisions on the screen.
Analyse serieller Busse