Rohde & Schwarz RTB2000 Series - Page 429

Fernsteuerbefehle
R&S
®
RTB2000
429Bedienhandbuch 1333.1611.03 ─ 05
Suffix:
<b>
.
1 | 2
<n> *
Selects the frame.
Rückgabewerte:
<EndTime> Bereich: depends on sample rate, record length, and time
base
Inkrement: depends on the time base
Std.-einheit: s
Verwendung: Nur Abfrage
BUS<b>:I2C:FRAMe<n>:AACCess?
Returns the address acknowledge bit value for the indicated frame.
Suffix:
<b>
.
1 | 2
<n> *
Selects the frame.
Rückgabewerte:
<Acknowledge> INComplete | ACK | NACK | EITHer
Verwendung: Nur Abfrage
BUS<b>:I2C:FRAMe<n>:ACCess?
Returns the transfer direction - read or write access from master to slave.
Suffix:
<b>
.
1 | 2
<n> *
Selects the frame.
Rückgabewerte:
<Access> INComplete | READ | WRITE | EITHer | UNDF
INComplete
The frame is not completely contained in the acquisition.
UNDF
Access is not defined.
Verwendung: Nur Abfrage
BUS<b>:I2C:FRAMe<n>:ACOMplete?
Returns the state of the address.
Suffix:
<b>
.
1 | 2
Analyse serieller Busse