Rohde & Schwarz RTB2000 Series - Page 430

Fernsteuerbefehle
R&S
®
RTB2000
430Bedienhandbuch 1333.1611.03 ─ 05
<n> *
Selects the frame.
Rückgabewerte:
<AddressComplete> ON | OFF
ON
Address was received completely.
Verwendung: Nur Abfrage
BUS<b>:I2C:FRAMe<n>:ADBStart?
Returns the start time of the address acknowledge bit.
Suffix:
<b>
.
1 | 2
<n> *
Selects the frame.
Rückgabewerte:
<AckStartTime> Bereich: depends on sample rate, record length, and time
base
Inkrement: depends on the time base
Std.-einheit: s
Verwendung: Nur Abfrage
BUS<b>:I2C:FRAMe<n>:ADDRess?
Returns the decimal address value of the indicated frame including the R/W bit.
Suffix:
<b>
.
1 | 2
<n> *
Selects the frame.
Rückgabewerte:
<AddressValue> Decimal value
Bereich: 0 bis 2047
Inkrement: 1
Verwendung: Nur Abfrage
BUS<b>:I2C:FRAMe<n>:ADEVice?
Returns the decimal address value of the indicated frame without R/W bit.
Suffix:
<b>
.
1 | 2
<n> *
Selects the frame.
Analyse serieller Busse