Rohde & Schwarz RTB2000 Series - Page 464

Fernsteuerbefehle
R&S
®
RTB2000
464Bedienhandbuch 1333.1611.03 ─ 05
BUS<b>:LIN:FRAMe<n>:CSValue?................................................................................. 466
BUS<b>:LIN:FRAMe<n>:IDPValue?................................................................................ 466
BUS<b>:LIN:FRAMe<n>:IDSTate?.................................................................................. 466
BUS<b>:LIN:FRAMe<n>:IDValue?...................................................................................466
BUS<b>:LIN:FRAMe<n>:SYSTate?................................................................................. 467
BUS<b>:LIN:FRAMe<n>:SYValue?..................................................................................467
BUS<b>:LIN:FRAMe<n>:VERSion?.................................................................................467
BUS<b>:LIN:FRAMe<n>:BCOunt?.................................................................................. 468
BUS<b>:LIN:FRAMe<n>:BYTE<o>:STATe?......................................................................468
BUS<b>:LIN:FRAMe<n>:BYTE<o>:VALue?..................................................................... 468
BUS<b>:LIN:FCOunt?
Returns the number of received frames of the active LIN bus.
Suffix:
<b>
.
1 | 2
Rückgabewerte:
<FrameCount> Total number of decoded frames.
Verwendung: Nur Abfrage
BUS<b>:LIN:FRAMe<n>:DATA?
Returns the data bytes of the specified frame.
Suffix:
<b>
.
1 | 2
<n> *
Selects the frame (1...n).
Rückgabewerte:
<FrameData> Comma-separated list of decimal values of the data bytes.
Verwendung: Nur Abfrage
BUS<b>:LIN:FRAMe<n>:STATus?
Returns the overall state of the specified frame.
Suffix:
<b>
.
1 | 2
<n> *
Selects the frame (1...n).
Rückgabewerte:
<FrameStatus> OK | UART | CHCKsum | PRERror | SYERror | WAKeup |
INSufficient | ERR | LENer
Verwendung: Nur Abfrage
Analyse serieller Busse