Rohde & Schwarz RTB2000 Series - Page 468

Fernsteuerbefehle
R&S
®
RTB2000
468Bedienhandbuch 1333.1611.03 ─ 05
BUS<b>:LIN:FRAMe<n>:BCOunt?
Returns the number of data bytes in the specified frame.
Suffix:
<b>
.
1 | 2
<n> *
Selects the frame (1...n).
Rückgabewerte:
<ByteCount> Number of words (bytes)
Verwendung: Nur Abfrage
BUS<b>:LIN:FRAMe<n>:BYTE<o>:STATe?
Returns the state of the specified data byte.
Suffix:
<b>
.
1 | 2
<n> *
Selects the frame (1...n).
<o> *
Selects the byte number (1...o).
Rückgabewerte:
<ByteStatus> OK | INS | UART
INS
Insufficient, the byte is not completely contained in the acquisi-
tion.
UART
At least one UART error occured. LIN uses UART words without
parity bit.
Verwendung: Nur Abfrage
BUS<b>:LIN:FRAMe<n>:BYTE<o>:VALue?
Returns the decimal value of the specified byte.
Suffix:
<b>
.
1 | 2
<n> *
Selects the frame (1...n).
<o> *
Selects the byte number (1...o).
Rückgabewerte:
<ByteValue> Decimal value
Analyse serieller Busse