Rohde & Schwarz RTB2000 Series - Page 469

Fernsteuerbefehle
R&S
®
RTB2000
469Bedienhandbuch 1333.1611.03 ─ 05
Verwendung: Nur Abfrage
15.11.6.4 LIN-Suche
SEARch:PROTocol:LIN:CONDition.................................................................................. 469
SEARch:PROTocol:LIN:FRAMe.......................................................................................470
SEARch:PROTocol:LIN:IPERror...................................................................................... 470
SEARch:PROTocol:LIN:CHKSerror..................................................................................470
SEARch:PROTocol:LIN:SYERror.....................................................................................470
SEARch:PROTocol:LIN:ICONdition..................................................................................471
SEARch:PROTocol:LIN:IDENtifier....................................................................................471
SEARch:PROTocol:LIN:DLENgth.....................................................................................471
SEARch:PROTocol:LIN:DCONdition................................................................................ 471
SEARch:PROTocol:LIN:DATA..........................................................................................472
SEARch:PROTocol:LIN:CONDition <SearchCondition>
Sets the event or combination of events to be searched for. Depending on the selected
event, further settings are required.
Parameter:
<SearchCondition> FRAMe | ERRor | IDENtifier | IDData | IDERror
FRAMe
Search for a frame type.
Set the frame type with SEARch:PROTocol:LIN:FRAMe.
ERRor
Search for errors of one or more error types.
Set the error types withSEARch:PROTocol:LIN:CHKSerror ,
SEARch:PROTocol:LIN:IPERror and SEARch:PROTocol:
LIN:SYERror.
IDENtifier
Search for identifier.
Specifiy the identifier with SEARch:PROTocol:LIN:
ICONdition and SEARch:PROTocol:LIN:IDENtifier.
IDData
Search for identifier and data.
Set the identifier (see IDENtifier) and the data with SEARch:
PROTocol:LIN:DLENgth, SEARch:PROTocol:LIN:
DCONdition and SEARch:PROTocol:LIN:DATA.
IDERror
Search for errors that occur with a specified identifier. Set the
identifier (see IDENtifier) and the errors to be found (see
ERRor).
*RST:
FRAM
Analyse serieller Busse