Rohde & Schwarz RTB2000 Series - Page 493

Fernsteuerbefehle
R&S
®
RTB2000
493Bedienhandbuch 1333.1611.03 ─ 05
Parameter:
<PatternCycles> Numeric value
Bereich: 1 bis 4096
*RST: 1
PGENerator:PATTern:TRIGger:MODE <TriggerMode>
Defines the arbitrary trigger mode of the pattern generator function.
Parameter:
<TriggerMode> CONTinuous | SINGle
CONTinuous
The CONT function (continuous trigger) issues the pattern conti-
nuously.
SINGle
If the SING setting is activated, the pattern is issued manually.
*RST: CONT
PGENerator:PATTern:TRIGger:SINGle
Manual output of a pattern (single trigger).
Verwendung:
Ereignis
PGENerator:PATTern:TRIGger:EXTern:SLOPe
Defines the slope of the external arbitrary pattern trigger.
Parameter:
<ExternSlope> POSitive | NEGative | EITHer
POSitive
Rising edge (rise).
NEGative
Falling edge (fall).
EITHer
Rising as well as the falling edge (both).
*RST: POSitive
PGENerator:PATTern:ARBitrary:DATA[:SET] <ArbitraryData>
Defines the arbitrary pattern.
Parameter:
<ArbitraryData> List of Values
Beispiel: PGEN:PATT:ARB:DATA 0,1,1,1,2,0,3,1,4,0
Signalerzeugung (Option R&S RTB-B6)