Remote control commands
R&S
®
RTE
1333User Manual 1326.1032.02 ─ 20
MTESt:RST
Clears all totals and results in all "Mask Test" result boxes.
Usage: Event
Asynchronous command
MTESt:SOURce <MaskTestName>,<Source>
MTESt:SOURce? <MaskTestName>
Selects the waveform to be tested against the mask.
Parameters:
<Source> C1W1 | C2W1 | C3W1 | C4W1 | M1 | M2 | M3 | M4 | M5 | M6 |
M7 | M8 | R1 | R2 | R3 | R4 | XY1 | XY2 | XY3 | XY4 | SG1TL1 |
SG1TL2 | SG2TL1 | SG2TL2 | SG3TL1 | SG3TL2 | SG4TL1 |
SG4TL2 | SG5TL1 | SG5TL2 | SG6TL1 | SG6TL2 | SG7TL1 |
SG7TL2 | SG8TL1 | SG8TL2 | Z1V1 | Z1V2 | Z1V3 | Z1V4 |
Z1I1 | Z1I2 | Z1I3 | Z1I4 | Z2V1 | Z2V2 | Z2V3 | Z2V4 | Z2I1 |
Z2I2 | Z2I3 | Z2I4 | DIFF1 | DIFF2 | COMMON1 | COMMON2
Waveform to be tested, see Chapter 18.4.2, "Waveform parame-
ter", on page 1074
*RST: C1W1
Parameters for setting and query:
<MaskTestName> String containing the name of the mask test
Usage: Asynchronous command
MTESt:CONDition <MaskTestName>,<PassFailMode>
MTESt:CONDition? <MaskTestName>
Sets the first criteria for a failed test, the kind of hits to be considered for test evalua-
tion. A test has failed if the number of sample hits or acquisition hits exceeds the limit
defined by MTESt:TOLerance.
Parameters:
<PassFailMode> SAMPles | ACQuisitions
SAMPles
Considers the number of samples that hit the mask.
ACQuisitions
Considers the number of acquisitions that contain at least one
sample hit. How many samples hit the mask in that acquisition is
not relevant.
*RST: SAMPles
Parameters for setting and query:
<MaskTestName> String with the name of the mask test
Usage: Asynchronous command
Mask testing
To Next Page
Loading...
