Instrument setup
R&S
®
RTE
139User Manual 1326.1032.02 ─ 20
Font size
Defines the font size of the text in dialog boxes.
Dialog transparency
Defines the transparency of the dialog box background. For high transparency values,
you can see the waveform display in the background, and possibly check the effect of
the changed setting. For lower transparency values, readability in the dialog box
improves.
Result dialog font size
Defines the font size of the text in result boxes. The size of the result box is adapted to
the font size.
Result dialog transparency
Defines the transparency of the measurement result boxes in the same way as Dialog
transparency.
4.2.2 Aligning the touchscreen
When the device is delivered, the touchscreen is initially calibrated. However, to ensure
that the touchscreen responds to the finger contact correctly, a touchscreen alignment
is required. Only users with administrator rights can fulfill this task.
Alignment of the touchscreen is useful:
●
At first use
●
If the position of the instrument has been changed, and you cannot look straight on
the screen
●
If another person operates the instrument
●
If you notice, that touching a specific point on the screen does not achieve the cor-
rect response
1. Press the [SETUP] key.
2. Select the "Screen" tab.
3. Tap "Touchscreen Calibration".
A blinking cross appears in the lower left corner of the screen.
4. Touch and hold the cross until "OK" is shown.
5. Repeat this action for the crosses in the other corners.
6. Tap the Rohde & Schwarz logo to display the instrument's user interface.
4.3 Frontpanel setup
In the "Frontpanel Setup" dialog box, you can adjust the luminosity of the screen and
luminous keys, assign functions to keys and knobs, and adjust the NAVIGATION knob.
Frontpanel setup
To Next Page
Loading...
