Rohde & Schwarz RTE Series - Numeric Results

Remote control commands
R&S
®
RTE
1409User Manual 1326.1032.02 ─ 20
18.16.7 Numeric Results
EXPort:RESult:SELect..................................................................................................1409
EXPort:RESult:NUMeric................................................................................................1409
EXPort:RESult:NAME...................................................................................................1409
EXPort:RESult:SAVE....................................................................................................1409
EXPort:RESult:SELect <Item>, [<STATe>]
EXPort:RESult:SELect? <Item>
Select the results that you want to save to file. All results are written into one file. To
save several result boxes into one file, use the command several times, one command
for each result box.
Parameters:
<STATe> ON | OFF
Parameters for setting and query:
<Item> String parameter, contains the name of the result box as written
in the "Numeric Results" dialog box.
Example:
EXPort:RESult:SELect 'Meas Results',1
Selects the 'Meas Results' box for export of numeric values.
EXPort:RESult:NUMeric <Numeric>
If ON, the result values are saved without unit and with more decimal places.
Parameters:
<Numeric> ON | OFF
*RST: OFF
EXPort:RESult:NAME <ExportFilename>
Sets the path, the file name, and the file format for the numeric results file. Available
file formats are CSV and HTML.
Parameters:
<ExportFilename> String parameter
EXPort:RESult:SAVE
Saves the selected result boxes to the file that is specified with EXPort:RESult:
NAME.
Usage:
Event
Data management