Instrument setup
R&S
®
RTE
142User Manual 1326.1032.02 ─ 20
Horizontal
The horizontalPOSITION / REF POINT knob can change the horizontal position or the
reference point. Select the action that you want to perform.
See also: Chapter 3.2.3.3, "HORIZONTAL controls", on page 67.
Rotary knob acceleration method
Selects a method to accelerate the movement of the element on the screen compared
to the actual movement of the rotary knob. Acceleration is useful if you need to move
from one end of the screen to the other, for example. Without acceleration, you have to
turn the knob quite a while to reach the other end. On the other hand, acceleration can
make precise selection difficult, since a small movement of the knob causes a rela-
tively large movement on the screen.
"None"
No acceleration method used.
"Squared"
Moderate acceleration method used.
"Exponential"
Strong acceleration method used.
Rotary knob acceleration interval
Defines the delay time during which the movement of the rotary knob is analyzed
before acceleration is applied. For short intervals, acceleration sets in quickly, but is
not as effective. For long intervals, acceleration is more effective. However, it takes lon-
ger until the instrument reacts on the knob's input. Furthermore, when you turn the
knob slowly during fine-tuning, subsequent movements that occur during the same
interval are accelerated, making precise selection difficult.
4.4 Display configuration
● Adjustable display elements..................................................................................142
● Display settings.....................................................................................................143
● Adjusting the display............................................................................................. 153
4.4.1 Adjustable display elements
You can customize the various elements on the screen according to your needs:
Signal bar
The signal bar can be manually switched on and off, it can be automatically hided, and
you can adjust color and transparency of the bar.
Toolbar
The toolbar contains icons that start frequently used functions. You can define which
tools are displayed on the toolbar.
Display configuration
To Next Page
Loading...
