Rohde & Schwarz RTE Series - Colors; Persistence; Display Settings

Instrument setup
R&S
®
RTE
143User Manual 1326.1032.02 ─ 20
Diagrams
The basic diagram elements can be shown or hidden: grid, crosshair, label, and tab
titles. You can also enter user-defined diagram names.
Waveforms
For waveforms, you can adjust the persistence, the waveform style, and color. You can
also annotate the waveforms by adding screen texts.
To set the color, you can select it from a color palette or assign color tables defining the
color of waveform pixels depending on the cumulative occurrence of the associated
values. You can assign a different color or color table to each waveform.
The following default color tables are provided:
●
"False colors"
●
"M-Hot"
●
"M-Hsv"
●
"M-Jet"
●
"Spectrum"
●
"Single Event"
●
"Temperature"
Dialog boxes and result boxes
You can configure the font size, contrast and transparency in dialog and result boxes.
Thus, you can optimize readability or keep track of the waveforms while changing set-
tings in dialog boxes.
Clear results
To delete all results, statistics, waveforms, and also the history, select "Display" menu
> "Clear all".
4.4.2 Display settings
Display settings are configured in the "Display" dialog box, which is opened when you
press the [DISPLAY] key or select an item from the "Display" menu.
4.4.2.1 Colors / persistence
Access: [DISPLAY] > "Colors / Persistence" tab
The "Colors / Persistence" tab contains settings for the general display of waveform
data.
Display configuration