Rohde & Schwarz RTE Series - Configuration; UART;RS-232;RS-422;RS-485 (Option R&S RTE-K2)

Remote control commands
R&S
®
RTE
1477User Manual 1326.1032.02 ─ 20
Usage: Query only
SEARch:RESult:SPI:FRAMe<m>:WORD<n>:STARt? <SearchName>
Suffix:
<m>
.
*
<n> *
Query parameters:
<SearchName>
Return values:
<FrameWordStart> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
SEARch:RESult:SPI:FRAMe<m>:WORD<n>:STOP? <SearchName>
Suffix:
<m>
.
*
<n> *
Query parameters:
<SearchName>
Return values:
<FrameWordStop> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
18.17.5 UART/RS-232/RS-422/RS-485 (option R&S RTE-K2)
● Configuration.......................................................................................................1477
● Trigger.................................................................................................................1483
● Decode results.................................................................................................... 1485
18.17.5.1 Configuration
BUS<m>:UART:RX:SOURce.........................................................................................1478
BUS<m>:UART:TX:SOURce......................................................................................... 1478
BUS<m>:UART:RX:THReshold..................................................................................... 1478
BUS<m>:UART:TX:THReshold......................................................................................1479
BUS<m>:UART:TECHnology.........................................................................................1479
Protocols