Instrument setup
R&S
®
RTE
159User Manual 1326.1032.02 ─ 20
Start Alignment
Starts the self-alignment procedure for all channels.
Remote command:
*CAL? on page 1077
Date / Time / Overall alignment state
Show the date, time and the summary result of the self-alignment process: not aligned,
passed or failed. Detailed results are provided on the "Results" tab.
Remote command:
CALibration:DATE? on page 1983
CALibration:TIME? on page 1984
CALibration:RESult? on page 1984
4.6.2 Results
For each channel, the results of the individual alignment steps are shown for all techni-
cal channel component. In case you require support, you may be asked to provide this
information.
Selfalignment
To Next Page
Loading...
