Instrument setup
R&S
®
RTE
164User Manual 1326.1032.02 ─ 20
The R&S®License Server must be set up as described in the R&S®License Server -
Managing Floating Licenses - User Manual.
You can find the manual in the Windows menu of your instrument: "Start > All Pro-
grams > R&S License Server > Open License Server Manual".
To open the License Server
►
In the Windows notification area, select , and then "Open Manager".
a)
Optional: If the status icon (
, or ) in the Windows notification area is not
shown yet, click "Start > All Programs > R&S License Server > License Server
Manager"".
The icon is now available in the Windows notification area.
b)
Optional: If the status is (stopped), select the icon, and then select "Start
License Server". Then, select > again.
The license server opens in the default web browser. The program adds all availa-
ble Rohde & Schwarz products (smart cards or devices) to a list and automatically
shows the first product that is detected. By default, the "Licenses" list opens with
an initial filtering for showing only active licenses.
4.9.2 HW options
This tab informs about the availability of hardware options.
4.9.3 Activating options
Options are activated by license keys. No additional installation is required. Consult
your sales representative and provide the material number and serial number (or the
device ID) of your instrument to get a license key. The license key is provided in written
form or in a file. Unregistered licenses must be registered in the R&S License Manager
before they can be activated on the instrument.
If the option has a portable license, keep the license file or option key at a save place.
You need the license to move it to another instrument.
Only users with administrator rights can activate options.
1. Press the [SETUP] key and select the "SW options" tab.
Options
To Next Page
Loading...
