Rohde & Schwarz RTE Series - Page 1753

Remote control commands
R&S
®
RTE
1753User Manual 1326.1032.02 ─ 20
Suffix:
<m>
.
1..3
Setting parameters:
<ErrorName>
<Enabler> ON | OFF
Usage: Setting only
TRIGger<m>:CMSB:ADVanced:FRAMe<n>:FLD<o>:IMAX <IndexMax>
TRIGger<m>:CMSB:ADVanced:IMAX <Frame>, <Field>, <Data>
Sets the end value of an index range if TRIGger<m>:CMSB:ADVanced:IMAX is set to
INRange or RANGe.
Suffix:
<m>
.
1..3
Only 1 = A-trigger, 2 | 3 = not available. Can be omitted.
Setting parameters:
<Frame>
<Field>
<Data>
Usage: Setting only
TRIGger<m>:CMSB:ADVanced:FRAMe<n>:FLD<o>:IMIN <IndexMin>
TRIGger<m>:CMSB:ADVanced:IMIN <Frame>, <Field>, <Data>
Specifies the index, or sets the start value of an index range.
Suffix:
<m>
.
1..3
Only 1 = A-trigger, 2 | 3 = not available. Can be omitted.
Setting parameters:
<Frame>
<Field>
<Data>
Usage: Setting only
TRIGger<m>:CMSB:ADVanced:FRAMe<n>:FLD<o>:IOPerator <IndexOperator>
TRIGger<m>:CMSB:ADVanced:IOPerator <Frame>, <Field>, <Operator>
Sets the operator for the index in the selected field of the selected frame.
Suffix:
<m>
.
Only 1 = A-trigger, 2 | 3 = not available. Can be omitted.
Protocols