Rohde & Schwarz RTE Series - Page 1782

Remote control commands
R&S
®
RTE
1782User Manual 1326.1032.02 ─ 20
Suffix:
<m>
.
1..4
<n> *
Return values:
<PhyAd> Range: 0 to 32
Increment: 1
*RST: 0
Usage: Query only
BUS<m>:MDIO:WORD<n>:REGI?
Returns the 5-bit register or device address field content (REGAD/DEVAD) in the pres-
ent acquisition of the selected word and the selected serial bus.
Suffix:
<m>
.
1..4
<n> *
Return values:
<RegAd> Range: 0 to 32
Increment: 1
*RST: 0
Usage: Query only
BUS<m>:MDIO:WORD<n>:ST?
Returns the Start Code (= start of frame code) in the present acquisition of the selected
word and the selected serial bus.
Suffix:
<m>
.
1..4
<n> *
Return values:
<StartCode> Range: 0 to 3
Increment: 1
*RST: 0
The parameter value "0" represents Clause 45, and "1" stands
for Clause 22.
The values "2" and "3" do not correspond with any legal parame-
ters according to the standard, but they can be searched for.
Usage: Query only
BUS<m>:MDIO:WORD<n>:STARt?
Returns the start time of the frame in the selected word of the selected serial bus.
Protocols