Acquisition and waveform setup
R&S
®
RTE
192User Manual 1326.1032.02 ─ 20
You can change the high definition "Bandwidth" in the "Digital Filter Setup".
History
Due to the 16-bit word length, the history depth is reduced, less waveforms are saved
than in normal mode.
Export
In high definition mode, waveform data in raw format is exported to file with 16-bit word
length, except for peak detect decimation (2 values with 8 bit). In addition, you can
define the byte order of the data words.
To define additional export settings, tap "Advanced Settings" in [FILE] > "Waveform".
High definition mode
To Next Page
Loading...
