Spectrum analysis
R&S
®
RTE
421User Manual 1326.1032.02 ─ 20
You can enable and display two time lines at the same time. This allows you to com-
pare the results at different times.
The position of the time line is defined by the index of the data acquisition in the his-
tory. How many acquisitions are available depends on the history settings.
See "Max. acquisition count" on page 315 and Chapter 7.4.2.1, "Viewer", on page 313.
Remote command:
CALCulate:MATH<m>:FFT:SPECtrogram:TIMeline<n>:STATe on page 1331
CALCulate:MATH<m>:FFT:SPECtrogram:TIMeline<n>:POSition on page 1330
Show lines permanently
Displays the spectrogram time lines in the diagrams until you disable this option.
If disabled, only the small arrow icons are permanently visible. The line is only dis-
played temporarily when you touch the arrow.
Spectrum Analysis (option R&S RTE-K18)
To Next Page
Loading...
