Rohde & Schwarz RTE Series - Page 500

Data and file management
R&S
®
RTE
500User Manual 1326.1032.02 ─ 20
Remote command:
MMEMory:AUTonaming:PREFix on page 1398
User text (enable)
If enabled, inserts the specified user text after the prefix.
Remote command:
MMEMory:AUTonaming:USERtext on page 1398
Text input
User-defined text to be inserted after the prefix.
Remote command:
MMEMory:AUTonaming:TEXT on page 1398
Date
If enabled, inserts the current date.
Remote command:
MMEMory:AUTonaming:DATE on page 1398
Index
If enabled, inserts an index.
Remote command:
MMEMory:AUTonaming:INDex on page 1398
Time
If enabled, inserts the current time.
Remote command:
MMEMory:AUTonaming:TIME on page 1398
Default path for all file operations
Defines the default path displayed in the file selection dialog box for loading and stor-
ing operations. If a USB flash drive is connected, the path is set automatically to the
drive letter of the USB flash drive.
To switch the directory quickly, double-tap the input field. Use the symbols on the left of
the file explorer box to change the directory.
Remote command:
MMEMory:AUTonaming:DEFaultpath on page 1398
Reset
Resets the default file path to the factory default.
Remote command:
MMEMory:AUTonaming:RESPath on page 1399
MMEMory:AUTonaming:RESall on page 1399
Autonaming